BeMoS one Controller
Central, modular platform for condition monitoring with SAW technology
The powerful BeMoS one electronics platform is a basic component of many of our products
In our prefabricated product packages, BeMoS one is combined with suitable sensors and components to monitor a wide range of potential failure modes on rotating equipment. BeMoS one enables highly accurate measurement results through the use of our patented SAW measurement methodology.
In addition to our multi-sensors (SAW, temperature), up to two further sensors from third-party manufacturers, as well as a speed sensor, can be connected to BeMoS one to enable even more comprehensive fault diagnostics. All measurement data collected by the controller is pre-processed onboard and transferred to the control room or your cloud via industrial interfaces. In addition, the controller provides our web application via an integrated web server.
In this, the measurement data is visually processed so that detailed information about the condition of the monitored machine can be viewed regardless of time and location. Individually adjustable alarms and warnings help to maintain systems in a timely, condition-oriented and planned manner and to increase the availability of machines. The most important characteristic values are logged in the internal memory of the BeMoS one. For long-term data storage, a data logger can be connected to the controller via USB.
Measurement & Data
SAW technology combined with proven vibration and temperature measurement: BeMoS one enables precise statements on machine condition and damage mechanisms
Temperature
Vibration
Shaft Speed
Custom
The system offers two analogue inputs. For example, to integrate pressure and flow sensors.
What BeMoS monitors
Technical Data
Electrical Data
Voltage: 12-24 Volt DC
Max. Power Consumption: 10 W
Sensor Connections
1x BestSens SAW
1x Analogue input 4 – 20 mA
Optional: 8-Kanal IEPE
1x Dgital Input
1x Analogue input 0 – 10V
Interfaces and Outputs
Digital:
Ethernet 10/100 Mbit
USB
Analog:
2x 4-20mA
Communication Protocols
TCP/IP
Modbus TCP
OPC UA Server
MQTT Client
Output
Digital potential-free output
Status LEDs
Housing
HxWxD: 4,6x12,4x7,9 cm
Weight: 450 g
Assembly: Tragschiene
Material: eloxiertes Aluminium
Protection class: IP20
Adding vibration measurement to the BeMoS one with the optional IEPE board
The optionally integrable IEPE board enables professional vibration measurements with the BeMoS one and offers connection options for up to eight vibration sensors. Eight sensor connections can be switched as desired to three independent measuring channels and enable synchronous and simultaneous sampling. Not only is the measuring range digitally switchable, the power supply of each channel can also be digitally switched off. The measuring channels have a high input impedance and automatically detect errors on the lines and the connection of a sensor. As three independent measuring channels, they are very well suited for the use of triaxial vibration sensors. The IEPE software interface integrates seamlessly into the BeMoS web APP and leaves nothing to be desired with time signal analysis, FFT analysis, orbit analysis and many other functions.
BEMOS WEB-APP
Online Data-Visualisation
The web app visualises your machine data so that you have an overview at all times and everywhere.
CONDITION MONITORING
with BeMoS one
The BeMoS one controller is a component of the following products and solutions
Smarte Mechanical Seal
Pump Monitor
BeMoS Measuring Kit
BeMoS one CONTROLLER
Download
You can get the data sheet here